Chic prints

Send

The question "Would you like to see my collection of stamps?" today has a completely different, new meaning.

PRINTED BAG DRAWING
The cotton bag is printed in the form of a stamp, highlighted by embroidery and textile colors.

YOU WILL NEED
Cotton bag, 2 postage stamps; transfer film for printing; a marker with fading paint; textile paints of black color and paints of two colors suitable for brands - with us it is yellow and green; brush; sewing threads; embroidery threads in black; cardboard; textile marker, textile contour pencil.
HOW TO MAKE
Scan the stamps and print on the transfer film, enlarging to the desired size. We increased one brand to the size. 20 x 30 cm, the second - up to the size. 8 x 11 cm. Iron the motives on the front side of the bag (see step-by-step instructions at the end of the article).
Put cardboard in the bag and accentuate the motifs with textile dyes. Write letters and numbers on the side and draw the outline of the motive with a marker. On the motif, embroider the outer line for embroidery in 2 folds. Letters are written using a contour pencil with dots (the interval between the dots is 1 cm).
LAMINATED BELTS
The belt from soft suede, thanks to the unusual decor, immediately sets you apart from those around you.

YOU WILL NEED
Suede with a width of 18 cm, a length corresponding to the desired length of the belt + 4 cm; 3 postage stamps; laminating machine and transparent film; paintto fix the edges of the skin Edge Kote and cotton buds; 2 piercing buttons and 6 rivets; glue stick; printing ironer; threads of contrasting color.
HOW TO MAKE
Suede cut into 2 strips of 9 cm wide. Glue the strips inside out to the inside. Stitch the belt, as shown in the photo of the model, with wavy lines of lines with contrasting threads so that it looks like wavy stamps on letters, the distance between the lines of lines is approx. 1 cm. Paint the edges of the belt using a cotton swab with paint for the ends of the skin.
Stamps enlarge on color copier to a height of approx. 7 cm, cut, laminate. To do this, put the enlarged marks in the middle on the film at a distance of 1.5 cm from each other. Cut the film at a distance of 5 mm from the sides of the brand with a strip of 22 cm length. Fold the strips with the film at a distance of 1.5 cm from the top and bottom sides of the brand with a flat iron, fold the folded sides back, stitch the folds to the edge on the sewing machine, the ends overlap the strips and connect with two rivets. Put these strips on the belt as loops.
Lay the ends of the belt on top of each other at a width of 4 cm and fasten them with the help of punched buttons.Photo: Jan Schmidel (7); catwalkpix.com (3); production: Diane Schrol.
Material prepared by Elena Karpova

Send